HDR / PhD Dr / M Sc / Eng.

Associate Professor of Physics

Affiliation: UR22ES12: Modeling Optimization and Augmented Engineering, ISLAIB, University  of  Jendouba, Béja 9000, Tunisia

Email: ridha [dot] djebali [at] islaib [dot] u-jendouba [dot] tn

 

قال الرسول الكريم عليه الصلاة والسلام:{من أحب أن تسره صحيفته فليكثر من الاستغفار}.

وقال عليه الصلاة والسلام :{ينزل ربنا تبارك وتعالى كل ليلة إلى السماء الدنيا حين يبقى الثلث الأخير من الليل الآخر فيقول :من يدعوني فأستجب له، من يسألني فأعطيه، من يستغفرني فأغفر له؟

وقال الحبيب عليه الصلاة وللسلام: {إن الله يبسط يده بالليل ليتوب مسئ النهار ويبسط يده النهار ليتوب مسئ الليل، حتى تطلع الشمس من مغاربها}.

و قال رسول الله صلي الله عليه وسلم "سيد الاستغفار أن يقول: اللهم أنت ربي لا إله إلا أنت خلقتني و أنا عبدك وأنا على عهدك ووعدك ما استطعت، أعوذ بك من شر ما صنعت، أبوء لك بنعمتك على و أبوء لك بذنبي فاغفر لي فإنه لا يغفر الذنوب إلا أنت " قال ومن قالها من النهار موقناً بها فمات من يومه قبل أن يُمسِ فهو من أهل الجنة، ومن قالها من الليل وهو موقن بها فمات قبل أن يصبح فهو من أهل الجنة" رواه البخاري.

قال لقمآن لابنه: {يا بنيّ, أكثر من الإستغفآر, فإنّ لله نفحآت لآ ينآلها إلا مستغفر}.

قال عـمر بـن الخـطآب، رضـــى الله عنه: {لو نـــزلت صآعقـــة من السمــــآء مآ أصـــآبت مستغفـــر}.

قال علي بن أبي طالب، رضـــى الله عنه: {ما ألهم الله سبحانه عبدا الاستغفار وهو يريد ان أن يعذبه}.

اللهم إني أتوسل بك إليك؛ وأقسم بك عليك؛ فكما كنت دليلي إليك، كن اللهم شفيعي لديك؛ وعاملني بالإحسان لا بالميزان و بالفضل لا بالعدل فإن حسناتي منك و سيئاتي مني، فجد اللهم بما هو منك على ما هو مني. آمين.

2024

63. 

62. M. Ferhi and R. Djebali, Optimized Model for Heat Transfer and Entropy Generation in Micro-Heat Exchanger Induced by Walls Injection Using Design of Experiments. Romanian Journal of Physics XX, XXX (2024).  Q2

61. Wiem Nasri; R. Djebali; Ali J. Chamkha; Abderrezak Bezazi; Farid Mechighel; Paulo Reis; Zied Driss. Thermal behavior of mesoporous Aramid fiber reinforced silica aerogel composite for thermal insulation applications: microscale modeling. Journal of Applied and Computational Mechanics, 10(1), January 2024, pp. 140-151. doi: 10.22055/jacm.2023.44601.4247 Q2

2023

60. R. Djebali, D. Khilifi and M. Ferhi, "Design of Experiments Investigation of Synthetic Jets Cooling Efficiency," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-6, doi: 10.1109/IREC59750.2023.10389495. https://ieeexplore.ieee.org/document/10389495

59. M. Ferhi, D. Khilifi and R. Djebali, "Heat Transfer and Irreversibility Response Due to Natural Convection in a Micro Partially Porous Cavity: Micro-Electronic Cooling Application," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-6, doi: 10.1109/IREC59750.2023.10389492. https://ieeexplore.ieee.org/document/10389492

58. M. Ferhi, D. Khilifi and R. Djebali, "Micro Scale Modeling of Heat Transfer and Entropy Generation in a Partially Porous Channel Using Lattice Boltzmann Method and Design of Experiments," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-5, doi: 10.1109/IREC59750.2023.10389319. https://ieeexplore.ieee.org/document/10389319

57. R. Djebali, M. Ferhi and D. Khilifi, "Computational and DOE Assessment of Heat Transfer and Thermodynamic Second Law in Closed Medium with Internal Fan," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-5, doi: 10.1109/IREC59750.2023.10389292. https://ieeexplore.ieee.org/document/10389292

56. Nasri, W.; Driss, Z.; R. Djebali; Lee, K.-Y.; Park, H.-H.; Bezazi, A.; Reis, P.N.B. Thermal Study of Carbon-Fiber-Reinforced Polymer Composites Using Multiscale Modeling. Materials 2023, 16, 7233. https://doi.org/10.3390/ma16227233 Q2

55. M. Ferhi, S Abidi, R. Djebali, F Mebarek-Oudina. Assessment of micro-scale heat exchangers efficiency using lattice Boltzmann method and design of experiments. Energy and Built Environment. DOI: 10.1016/j.enbenv.2023.06.011 Q1

54. B. Mliki, R. Miri, R. Djebali and M.A. Abbassi; CuO -water MHD mixed convection analysis and entropy generation minimization in double lid-driven U-shaped enclosure with discrete heating. Acta Mechanica et Automatica. 2023; 17(1):1-12, DOI 10.2478/ama-2023-0013. Q3

2022

53. R. Djebali and M. Ferhi, Appraising heat transfer enhancement by nanofluid and entropy generation minimization in a micro tall cavity: Magnetic field and sinusoidal heating effects, 2022 13th International Renewable Energy Congress (IREC), 2022, pp. 1-4, doi: 10.1109/IREC56325.2022.10002078.

52. R. Djebali and M. Ferhi, DOE of heat transfer and entropy generation in channel microheat exchanger driven by a coflow, 2022 13th International Renewable Energy Congress (IREC), 2022, pp. 1-5, doi: 10.1109/IREC56325.2022.10001923.

51. R. Miri, M. A. Abbassi, M. Ferhi and R. Djebali, Entropy generation of MHD forced convection nanoliquid in a channel containing three cylinder blocks, 2022 13th International Renewable Energy Congress (IREC), 2022, pp. 1-5, doi: 10.1109/IREC56325.2022.10002020.

50. R. Miri, M.A. Abbassi, M. Ferhi and R. Djebali; Second Law Analysis of MHD Forced Convective Nanoliquid Flow Through a Two-Dimensional Channel. Acta Mechanica et Automatica. 2022; 16(4): 417-431. https://doi.org/10.2478/ama-2022-0050

49. M. Ferhi, R. Djebali, S. Abboudi and W. Alkouz. MHD convective nanofluid flow, heat transfer and irreversibility analysis in a horizontal micro tall cavity with heat sources in the slip regime. Journal of Nanofluids, Volume 11(4), 510-527 (2022).

48. M. Ferhi and R. Djebali, Heat Transfer Appraising and Second Law Analysis of Cu-Water Nanoliquid Filled Microchannel: Slip Flow Regime. Romanian Journal of Physics 67, 605 (2022) 

47.M. Ferhi, R. Djebali, F. Mebarek-Oudina, N. H. Abu-Hamdeh, S. Abboudi, MHD Free Convection Through Entropy Generation Scrutiny of Eco-Friendly Nanoliquid in a Divided L-Shaped Heat Exchanger with LBM Simulation, Journal of Nanofluids, 11 (1), 99–112 (2022).

2021

46.  M. Ferhi, R. Djebali, W. Al‐Kouz, S Abboudi, AJ Chamkha. MHD conjugate heat transfer and entropy generation analysis of MWCNT/water nanofluid in a partially heated divided medium. Heat Transfer-Asian Research. 2021, 50(1), pp. 126–144. https://doi.org/10.1002/htj.22007.

45. R. Djebali, F. Mebarek-Oudina, R. Choudhari, Similarity solution analysis of dynamic and thermal boundary layers: further formulation along a vertical flat plate. Phys. Scr. 96(8), 085206, 2021, DOI: 10.1088/1402-4896/abfe31

44. R. Djebali, Mesoscopic study of mixed convection and heat transfer due to crescent shape hot ‎source under magnetic field and Joule effect, Romanian Reports in Physics, 73(1), 106 (2021).

2020

43. R. Djebali, Efficient 2nd Order Taylor Series Expansion Model to Integrate Stiff and Non-Linear ODEs: Comparison to Rk45-Type Integrators. Glob J Eng Sci. 6(5):1-7, 2020. GJES.MS.ID.000647. DOI: 10.33552/G JES.2020.06.000647.

42. R. Djebali, Numerical Analysis of Nanofluid Cooling Efficiency of Hot Multishaped Cylinder in Vertical Porous Channel, Romanian Journal of Physics , 2020, 65(9-10), pp. 1–10, 122. 

41. M. Ferhi, R Djebali, Appraising conjugate heat transfer, heatlines visualization and entropy generation of Ag-MgO/H2O hybrid nanofluid in a partitioned medium, International Journal of Numerical Methods for Heat and Fluid Flow. 30(10), pp. 4529-4562 (2020). https://doi.org/10.1108/HFF-10-2019-0749.

40. R. Djebali, A. Jaouabi, T. Naffouti & S. Abboudi, Accurate LBM appraising of pin-fins heat dissipation performance and entropy generation in enclosures as application to power electronic cooling, International Journal of Numerical Methods for Heat and Fluid Flow .  30(2), 742-768, 2019.

2019

39. M. Ferhi, R Djebali, Abboudi S. & H Kharroubi, Conjugate natural heat transfer scrutiny in differentially heated cavity partitioned with a conducting solid using the lattice Boltzmann method, Journal of Thermal Anlysis and Calorimetry , 138, 3065-3088, 2019.

38.  M. Ferhi, R Djebali, A Said, Conjugate naturalc onvection in a partitioned square cavity filled with Al2O3-Water nanofluid based on experimentalc orrelations: a Lattice Boltzmann investigation. CFD Letters, 11(3), 1-27, 2019.
37.  W. Nasri, R Djebali, Marjan, G., Mohamed Ammar, A., & Said, A.. Apple Convective Drying - Part I: Finite Elements Parametric Study for Appraising the Operating Conditions Effects. CFD Letters, 11(3), 28-41, 2019.
36.  W. Nasri, R Djebali, Marjan, G., Mohamed Ammar, A., & Said, A., Apple Convective Drying - Part II: Scrutinization of Monitoring Parameters Levels via Taguchi Optimization Approach. CFD Letters, 11(3), 42-54, 2019.
35.  I. Boumrar, R Djebali, Experimental Validation of Pressure Distribution Prediction under Delta Wing Apex Vortex at High Reynolds Numbers. CFD Letters, 11(3), 92-102, 2019.
34.  R Djebali, Said, A., & M.A. Abbassi (2019). Transition Thresholds and Routes to Unsteadiness of Magneto-Convective Flows in Tall Cavities at Low-Prandtl Number Fluids. CFD Letters, 11(3), 55-71.

2018

33.  R. Djebali. Lattice Boltzmann Method Computation of Turbulent High-Temperature Plasma Jets. Glob J Eng Sci.  1(1): 2018. GJES.MS.ID.000503.

32.  MA Abbassi, MR Safaei, R Djebali ,K Guedri, B Zeghmati , AA.A.A. Alrashed, LBM simulation of free convectionin a nanofluid filled incinerator containing a hot block, International Journal of Mechanical Sciences , 144, pp. 172-185, 2018.

31. M.A. Abbassi, R. Djebali and K. Geudri; Effects of heater dimensions on nanofluid natural convection in a heated incinerator shaped cavity containing a heated block; Journal of thermal Engineering, 4(3), pp.2018-2036, 2018.

30.  R. Djebali, M.A. Abbassi, A. Jaouabi; Lattice Boltzmann Method for the Simulation of Flows and Transfers at Very High-Temperature: A Dynamic Framework of Conversion to Physical Space with Test Cases; Springer Book "Thermo-Mechanics Applications and Engineering Technology," chap.7, pp.151-169, 2018.

2017

29. M.A. Abbassi, B. Mliki and R. Djebali; Lattice Boltzmann Method for simulation of nanoparticle Brownian motion and magnetic field effects on free convection ina nanofluid-filled open cavity with heat generation/absorption and non uniform heating on the left solid vertical wall;  Fluid dynamics & Materials Processing, 13(2), pp.59-83, 2017.

 28. W. Nasri, R. Djebali, S. Dhaoui, S. Abboudi and H. Kharroubi; Finite Elements Multiphysics Investigation of Thermoelectric Systems for Electricity and Cooling Generation; International Journal of Modern Studies in Mechanical Engineering, Vol. 3, n.4, pp. 1-13, 2017. doi: 10.20431/2454-9711.0304001

27. R. Djebali, A. Hleli, A. Lamari and M.A. Abbassi; Optimization study on the operating conditions to improve the quality of surfaces coating obtained by plasma spraying process; Journal of thermal Engineering, Vol. 3, n.4, pp. 1411-1418 , 2017. 

26. R. Djebali;  A confrontation of three design techniques' results for optimizing plasma spraying operating conditions toward deposit requirements: Lattice Boltzmann, Finite Difference and Taguchi experimental design; International Journal of Energy Optimization and Engineering (IJEOE), Vol. 6, n.4, pp 16-35, 2017.

2016 

22.  R. Djebali, Mohammed ElGanaoui, Abdallah Jaouabi, Bernard Pateyron; Scrutiny of spray jet and impact characteristics under dispersion effects of powder injection parameters in APS process; International Journal of Thermal Sciences, vol. 100, pp. 229-239, 2016.

2015 

21. R. Djebali , B. Pateyron and  M. El Ganaoui;  Scrutiny of plasma spraying complexities with case study on the optimized conditions toward coating process control; Case Studies in Thermal Engineering , vol. 6, pp. 171-181, 2015.

20. H. Moumni, H. Welhezi, R. Djebali and E. Sediki; Accurate Finite Volume Investigation of Nanofluid Mixed Convection in Two-sided Lid Driven Cavity Including Discrete Heat Sources; Applied Mathematical Modelling, vol. 39, n. 14, pp. 4164–4179, 2015.

2014  

19. R. Djebali; Comments on "Lattice Boltzmann Analysis of 2-D Natural Convection Flow and Heat Transfer within Square Enclosure including an Isothermal Hot Block, by Naffouti, Zinoubi and Ben Maad"; CFD Letters,vol.6, n. 3, pp. 126-130, 2014.

18. M. Toujani, R. Djebali, L. Hassini, S. Azzouz and A. Belghith; Hydro-thermo-viscoelastic Based Finite Element Modeling of Apple Convective Drying Process, Computer Modeling in Engineering & Sciences, vol. 98, No. 4, pp. 469-485, 2014.

17. R. Djebali; Investigating Plasma-Jets Behavior using Axisymmetric Lattice Boltzmann Model under Temperature Dependent Viscosity; Communications in Computational Physics, vol. 15(3),  pp. 677-691, 2014.

2013

16. R. Djebali  and B. Mondal; Comments on "A generalized lattice Boltzmann method for three-dimensional incompressible fluid flow simulation, by Rahmati and Ashrafizaadeh"; CFD Letters, vol. 5, n. 4, pp. 193-196, 2013.

15. R. Djebali, M. Toujani and B. Pateyron ; Taguching the Atmospheric Plasma Spraying Process: Influence of Processing Factors on Droplet Impact Properties Obtained on Dense ZrO₂ and H₂Ar75% Plasma Gas; Computers, Materials & Continua, vol. 37, n. 3, pp. 147-160, 2013.

14. R. Djebali, B. Pateyron and M. El Ganaoui; A Lattice Boltzmann Based Investigation of Powder In-flight Characteristics during APS Process, Part II: Effects of Parameter Dispersions at Powder Injection; Surface & Coatings Technology, vol. 220, pp.157-163, 2013.

2012

13.  R. Djebali; B. Pateyron and M. El Ganaoui; Prandtl Number Signature on Flow Patterns of Electrically Conducting Fluid in Square Enclosure; Computer Modeling in Engineering & Sciences, vol. 88, n. 4, pp.293-307, 2012.

12. T. Naffouti and  R. Djebali; Natural Convection Flow and Heat Transfer in Square Enclosure Asymetrically Heated from Below: A Lattice Boltzmann Comprehensive Study; Computer Modeling in Engineering & Sciences, vol. 88, n. 3, pp. 211-228, 2012.

11. R. Djebali,  M. El Ganaoui, B. Pateyron; A Lattice Boltzmann Based Investigation of Powder In-flight Characteristics during APS Process, Part I: Modelling and Validation; Progress in Computational Fluid Dynamics, vol. 12, n. 4, pp. 270-278, 2012.

10. R. Djebali,  M. El Ganaoui, T. Naffouti; A 2D Lattice Boltzmann Full Analysis of MHD Convective Heat Transfer in Saturated Porous Square Enclosure; Computer Modeling in Engineering & Sciences, vol. 84, n. 6, pp.499-527, 2012.

2011

9. R. Djebali, B. Pateyron; M. El Ganaoui; A lattice Boltzmann-Based Study of Plasma Sprayed Particles Behaviours; Computers, Materials & Continua, vol. 25, n. 2, pp. 159-176, 2011.

8. R. Djebali and M. El Ganaoui; Assessment and Computational Improvement of Thermal Lattice Boltzmann Models Based Benchmark Computations; Computer Modeling in Engineering & Sciences, vol. 71, n. 3,, pp. 179-202, 2011.

7.   R. Djebali, M. El Ganaoui, B . Pateyron and H. Sammouda; Simulation and Modeling of Turbulent Plasma Jet Based on Axisymetric LBGK Model; Defect and Diffusion Forum, vols. 312-315, pp 1167-1171, 2011.

2010

6.   R. Djebali, H. Sammouda, M. El Ganaoui; Some Advances in Applications of Lattice Boltzmann Method for Complex Thermal Flows; Adv. Appl. Math. Mech., vol. 2, n. 5, pp. 587-608, 2010.

5. M. El Ganaoui and R. Djebali; Aptitude of a Lattice Boltzmann Method for Evaluating Transitional Thresholds for Low Prandtl Number Flows in Enclosures; Comptes Rendus - Mécanique, vol. 338, n. 2, pp.85-96, 2010.

4. R. Djebali, B. Pateyron, M. El Ganaoui and H. Sammouda; Lattice Boltzmann Computation of Plasma Jet Behaviors: Part II. Argon-Azote Mixture; Int. Rev. Chem. Eng., vol 2. n. 1, pp. 86-94, 2010.

2009

3.  R. Djebali,  B. Pateyron, M. El Ganaoui and H. Sammouda; Axisymmetric High Temperature Jet Behaviors Based on A Lattice Boltzmann Computational Method Part I: Argon Plasma; Int. Rev. Chem. Eng., vol.  1.  n.  5, pp. 428-438, 2009.

2.  R. Djebali, M. El Ganaoui and H. Sammouda; Investigation of a side wall heated cavity by using lattice Boltzmann method; European Journal of Computational Mechanics,  vol.  18.  n.  2, pp. 217-238, 2009.

1. R. Djebali,  M. El Ganaoui, H. Sammouda and R. Bennacer; Some Benchmarks of a Side Wall Heated Cavity Using Lattice Boltzmann Approach; Fluid dynamics & Materials Processing  , vol. 5, n. 3, pp. 261-282, 2009.

 

Some conferences papers

 

 

2022

39. R. Djebali, D. Khilifi and M. Ferhi, "Design of Experiments Investigation of Synthetic Jets Cooling Efficiency," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-6, doi: 10.1109/IREC59750.2023.10389495.

38. M. Ferhi, D. Khilifi and R. Djebali, "Heat Transfer and Irreversibility Response Due to Natural Convection in a Micro Partially Porous Cavity: Micro-Electronic Cooling Application," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-6, doi: 10.1109/IREC59750.2023.10389492.
37. M. Ferhi, D. Khilifi and R. Djebali, "Micro Scale Modeling of Heat Transfer and Entropy Generation in a Partially Porous Channel Using Lattice Boltzmann Method and Design of Experiments," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-5, doi: 10.1109/IREC59750.2023.10389319.
36. R. Djebali, M. Ferhi and D. Khilifi, "Computational and DOE Assessment of Heat Transfer and Thermodynamic Second Law in Closed Medium with Internal Fan," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-5, doi: 10.1109/IREC59750.2023.10389292.

2022

35. Mokhtar Ferhi, Ridha Djebali, Heat transfer and entropy generation in a micro-heat exchanger induced by wall injection. The 13th International Renewable Energy Congress, December, 13-15, 2022 Hammamet -Tunisia.
34. Ridha Djebali and Mokhtar Ferhi, Appraising of heat transfer enhancement and entropy generation minimization in a micro tall cavity under magnetic field and sinusoidal heating. The 13th International Renewable Energy Congress, December, 13-15, 2022 Hammamet -Tunisia.
33. Ridha Djebali and Mokhtar Ferhi, DOE of heat transfer and entropy generation in channel micro micro-heat exchanger driven by a coflow. International Conference on Energy and Material Sciences (EMS'2022) November 16-17, 2022 Skikda-Algeria.

2021

32. Ridha Djebali and Mokhtar Ferhi, Irreversibility analysis and heat transfer of mhd ecofreindly nanofluid in l-shaped heat exchanger, CIMatEn, Nov. 5-7, 2021, Sousse, Tunisia

31. Mokhtar Ferhi, Appraising heat transfer and entropy generation of cu-water nanofluid in a partially heated microchannel, CIMatEn, Nov. 5-7, 2021, Sousse, Tunisia

30. Ridha Djebali, Mokhtar Ferhi, Bouchmel Mliki and Mohamed Ammar Abbassi. Are SRT-BGK models still usable versus emerging models? An augmented model applied to nanoliquids, ICMMES, July 12-16, Hammamet - Tunisia

29. Mokhtar Ferhi, Ridha Djebali, Bouchmel Mliki and Mohamed Ammar Abbassi. Mesoscopic Study of fluid flow and heat transfer in a linearely heated micro-heat exchanger, ICMMES, July 12-16, Hammamet - Tunisia

28. Mohamed Ammar Abbassi, Bouchmel Mliki, Mokhtar Ferhi and Ridha Djebali. Enhancement and control of nanoliquid MHD natural convection in an enclosure containing a hot triangular block, ICMMES, July 12-16, Hammamet - Tunisia

2018

28. R. Djebali, W. Nasri, M.A. Abbassi, Z. Driss; Convective apple drying: scrutinization of operatory conditions via Taguchi optimization approach; International Conference on Mechanics and Energy December 20-22, 2018, Hammamet, TUNISIA

27. W. Nasri, Z. Driss, R. Djebali; Convective apple drying: Appraising influence of operatory conditions using FE modeling; International Conference on Mechanics and Energy December 20-22, 2018, Hammamet, TUNISIA

2017

25. R. Djebali et al.; Powerfulness of SRT-BGK LB thermal models to evaluate transitional thresholds in low Prandtl number flows; LBM Springer School with OpenLB software Lab; (Hammamet, Tunisia) March 6-10/2017.

26. R. Djebali, W. Nasri, K. Moueddeb and S. Abboudi, Thermoelectric modules as a sustainable solution for refrigeration and electricity generation. Proceeding of the 2nd conference Scientific Days of Medjerda (SDMed2017), 25-27 October 2017, ESIER Medjez el Bab, Tunisia.

2016

21. R. Djebali, M.El Gnaoui, W. Nasri and M.A. Abbassi; CIMatEn, 17-19/12/2016 Sousse, Tunisie.

22. R. Djebali et al., ICAS 2016- ISBN 978-605-9546-00-3, 31/8-2/9/2016 Istanbul, Turkey.

24. R. Djebali, B. Pateyron and M. El Ganaoui; 7th IREC (Hammamet, Tunisia) March 22 - 24.

2013

20. K. Lahmer, R. Bessaih, A. Scipioni, M. ElGanaoui and R. Djebali; SFT (Gérardmer- France) Mai 28-31.

2011

12.    R. Djebali et al. 5RIPT (Limoges-France).
13. a R. Djebali et al. JTET (Tozeur-Tunisie)
14. c R. Djebali et al. CM (Oujda-Maroc)
15. d R. Djebali et al. ICCHMT (Istanbul-Turkey)
16. d R. Djebali et al. NASCASE11 (Settat-Maroc)
17. d R. Djebali et al. SFGP (Lille-Grand palis- France)
18.    R. Djebali et al. SFT (Perpignan-France)
19. b R. Djebali et al. CAEX (CEC-Limoges-France)

2010

7. c R. Djebali et al. AMT (Settat, Maroc )
8. c R. Djebali et al. ICTEA (Marrakesh, Morocco)
9.    R. Djebali et al. CIFEM, (Saly, Sinégal)
10.   R. Djebali et al. SFT (Le Touquet France)
11.   R. Djebali et al. HEFAT (Antalya, Turkey)

2009

1. a R. Djebali et al. JTET (Bizerte-Tunisie)
2. b R. Djebali et al. JITH (Jerba-Tunisia)
3. c R. Djebali et al. CM (Marrakech-Maroc)
4. d R. Djebali et al. ICCHMT (Guangzhou, China)
5. b R. Djebali et al. Plasmas Froids, (Bonascre-France)
6. d R. Djebali et al. CEAM (Virtual forum - Italy)

______________________

a: Communications orales sans actes dans un congrès international ou national

b: Communications par affiche dans un congrès international ou national

c: Articles dans des revues ou ouvrages sans comité de lecture (Proceedings de congrès, vulgarisation)

d: Articles dans des revues ou ouvrages avec comité de lecture (Proceedings de congrès)

 

Books / Monographs

 

R. Djebali (2012): "Méthode de Boltzmann pour les écoulements et les transferts: Concept, implémentation et applications aux écoulements dans les enceintes et aux jets plasma turbulents". Presses Académiques Francophones, 172 p.

قال الله تعالى {وسارعوا إلى مغفرة من ربكم وجنة عرضها السماوات والأرض أعدت للمتقين الذين ينفقون في السراء والضراء والكاظمين الغيظ والعافين عن الناس والله يحب المحسنين}. صدق الله العظيم

قال الله تعالى {وإنك لعلى خلق عظيم}.

و سئل صلى الله عليه وسلم{ما خير ما أعطي الإنسان ؟ قال: خلق حسن}.

و قال الصحابة لرسول الله صلى الله عليه وسلم يسألونه: يا رسول الله من أحب عباد الله إلى الله ؟ قال: {أحسنهم خلقا}.

و قال عليه الصلاة والسلام: {إن المؤمن ليدرك بحسن خلقه درجات الصائم القائم}.رواه أبو داود.

و قال عليه الصلاة والسلام: {وما من شئ أثقل في ميزان المؤمن يوم القيامة من خلقٍ حسن}.

و قال عليه الصلاة والسلام: {فأكثر ما يدخل الناس الجنة تقوى الله وحسن الخلق}. صححه الترمذي وقال غريب.

و قال عليه الصلاة والسلام: {إن من أحبكم إلى وأقربكم مني مجلسا يوم القيامة، أحاسنكم أخلاقا}. حسنّه الترمذي.

و قال: صلى الله عليه و سلم {خيركم خيركم لأهله؛ وأنا خيركم لأهلي}.

و من حسن الخلق معاشرة الزوجة بالإكرام والإحترام، و بشاشة الوجه وطيب الكلام.

قال الحبيب عليه الصلاة والسلام: {كل أمر ذي بال لا يبدأ فيه ببسم الله الرحمن الرحيم ، وبالحمد لله ، أو بحمد الله أو بذكر الله ، فهو أجذم أو أقطع أو أبتر}.